ELU TGS 171, Locking pin - Ball, knob (942234-00)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking for a new ball-knob for your old ELU saw?, then this is something you should checkout!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Did you lose or break your ball-knob for the turntable locking pin on your ELU saw?
Well i have a solution for you!
OPTIONAL Hardware: (If you don't have the hardware it can be glued to the locking-pin instead)
1x M5 Grub screw (Designed for Grub screw, normal screw can be used but will stick out.)
Length can be between 8mm -> 16mm*
How to assemble:
Push ball-knob onto locking-pin shaft
Screw the screw into the hole* (It's designed for them to cut their own threads)
*Or glue the ball-knob onto the shaft
Recommend Print Settings:
Material: PLA, PETG or ABS
Layer height: 0.1mm to 0.15mm
Perimeters/Walls: 5
Supports: OFF! (Model is designed to print without supports!)
Brim: 4mm (Only needed if not using glue on print bed)
Infill: 15% to 30%
Print orientation: See pic below

Not correct thread or some other idea for improving the model?
Don't hesitate to get in contact, and we will make one with that angle!
Looking for other 3D-Printable stuff for your ELU tablesaw, then checkout this collection:
https://www.printables.com/@markaabo_566920/collections/3024699