Mean Well LRS-350-24 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the Mean Well LRS-350-24 power supply.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mean Well LRS-350-24 Wall Mount
Description
Wall mount for the power supply. Covers the mains and leaves the low voltage terminals exposed.
Assembly
Cover
Two holes for M3 heat set inserts either side of the inlet module opening.
I used a module I recovered from an old Prusa MK3S PSU, here are some from Amazon, though the model will need adjustment.
M4 bolt hole to connect to PSU, I used an 8mm
Drywall screw hole for wall mounting
Bottom
M4 bolt hole to connect to PSU, I used an 8mm
Drywall screw hole for wall mounting
Included Files
STL - Ready for 3D slicing.
bracket.stl - 90 degree bracket
cover.stl - Bottom cover
STEP - Editable file for modifications.
bracket.step
cover.step
How I Sliced / Printed
Slicer: PrusaSlicer-2.9.4
Printer: Prusa Core One Plus
Nozzle: 0.4mm HF
Material: 3D-Fuel Tough Pro PLA+, Island Fuchsia, 1.75mm
Printer Settings: 0.25mm Balanced