Case for presenting model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for model presentation. Required some acrylic sheet.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I made simple case for model that my wife was doing - garden cafe. Due to that cleaning from dust is much complex when there are a lot of tiny details i wanted to make it easier.
Case still requires acrylic sheet (or some other transparent material:
Top x1: 174x174
Depending on printer settings it should go tight but i also used some UV glue to lock it in place.
Walls x4: 180 x 205 (i cut to 179 and 203/204 for easier fit)
Rows for acrylic sheet are 1.5mm so 1mm is good.
In my case i took transparent sheet from really cheap ikea frames 21 x 25 or something like this that were on sale.