2-Liter Bottle Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish handle makes 2-liter bottles easy to handle.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 273
- Wydruki
- 2
- Wyświetlenia
- 1556
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
2-liter soda bottles invariably take two hands to handle. This stylish handle lets you one-hand these bottles with ease. Handy! Reuse your bottle as a watering jug, or maybe as an elegant table carafe.
The model consists of two parts: a band which slips over the straight section of your bottle, and the handle with a tapered slot. Sliding the handle slot onto the ends of the band pinches the band together tightly and holds everything together securely with a friction fit. No glue, no fasteners. Disassembles just as easily.
The model is scaled for a standard 2-liter bottle (110mm dia., nominal), but you should be able to scale it up or down for different sized bottles. Prints without supports. Use a 0.4mm line width for optimal printing. The handle prints standing upside-down, but there is a small partial brim built into the model to keep is secured to the bed as you print its full height.