Whirlpool Washer/Dryer End Caps - Part 285846
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End Caps for Whirlpool & Kenmore washing machines and dryers (Part Number 285846) that are no longer available to buy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While refurbishing an older Whirlpool washing machine, I noticed the end caps were cracking in a couple of places. Replacements are no longer available to purchase, so decided to make a model to 3D print.
These will work in place of Part Number 285846, which applies to several older Whirlpool and Kenmore models of washers and dryers. You can use them to replace a broken part or get fancy and add some flair to your machines!
There are two versions added, one standard version and one with a heavier filet for more rounded edges on the outside.
I printed these in PETG and used a dedicated support material (support for PLA/PETG) for the main overhang. Definitely recommend doing that since that part is visible on the outside. Printed on a textured PEI plate gives a nice texture to the outside edge.
Happy printing!