Creality K1 SE Camera Mount - Stronger screw standoffs and tighter fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality K1 camera mount with more ventilation, stronger screw posts, tighter fit to lessen rattling
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
In printing @OnkyTonk's model that this is based on, I had the screw posts break several times, twice it happened when just pulling it off the build plate. I'm not a fan of using glue for such small pieces, they tend to move before the glue sets up, or it sets up fast and out of position
Since I decided to rework the screw posts, I figured I would tinker with the other things. The screw posts were lengthened so that it didn't rattle before I screwed the camera into the mount. The backing plate was thickened as well, to allow me to REALLY ventilate the back while still having enough rigidity to keep its shape.
NO idea what you should print this in. I used HT-PLA, for several items on my K1SE, and it's been holding up just fine. I'm guessing PETG should work well, and if you need to worry about temps within an enclosure, something even more robust should work.
Fits my K1SE, and judging on the remix info and the original file that was based off of, this should work for the K1, K1C & K1Max. Since I don't have those, and can't test this, any feedback would help others and myself.