Gridfinity Button (Coin) Cell Storage (1x1x8)

An 8 Gridfinity-units high box for holding all the most common button cells (at least, my most common)

I printed this up after trying a couple of the others, and was a from-scratch re-write using some of my own gridfinity assets from my own library.

This particular layout ended up with one side having a large blank indent on it, so  I printed a label to glue on the side to keep track of the hole sizes (listed larges to smallest) and help the family easily see what the common interchangeable sets of cells are. I've listed those hole sizes and capacities here:

24.6mm 1 stack,  17 cells
CR2430

20.2mm (1x16)
CR2032

1.8mm [2 stacks x 10 cells] = 20 cells
LR44 AG13, A76, 357, 76A

8mm [2 stacks x 13 cells ] = 26 cells
LR41, AG3, 392A, LR736, SR41, 192, 92A

7mm 1 stack, 19 cells
377, SR626SW, AG4, LR626, LR66, 376 

Printed in PLA with standard Gridfinity settings ( 2mm layers with a 4mm nozzle , no supports)

I took Dalkain's idea of storing a little wedge, you need a screwdriver or something, so it's stored with it.

Button-cells are all set to be tangent to the external plane of the tolerance-appropriately-undersized Gridfinity 1x1, and there is a recess on each side to make the button cells pop

Total measured Height of this is ~66mm, which, with Gridfinity vertical unit size of 7mm (plus base cleat) is 8 units high.

Model is free to fork in Onshape - https://cad.onshape.com/documents/1a273a53058155f1d360213a/v/d51861ee3ec7dd98d45263df/e/74640c972fe9b53fc5d9c8dd?renderMode=0&uiState=695b7bf8d13f1a02338a2a4a

Just make sure you give me the downloads/comments/likes here if you want to go right to the model.