Closet Hanger Organizers/Dividers/Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple closet organizer with labels made for separating clothes in my closet. Intended for ~30mm diameter closet rods.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 101
- Wydruki
- 3
- Wyświetlenia
- 327
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Simple closet organizer with labels made for separating clothes in my closet. Intended for ~30mm diameter closet rods, though I've attached the 3D source files so you can easily edit them. You could make it more space and filament-efficient by reducing the height of the part and either attach a separate weight or simply use a denser infill.
I recommend painting the embossed letters in a contrasting color. Or you could pause the print and swap filament to finish printing the embosses text with a contrasting color filament.
I've attached STL files for the different versions that I made for my closet. You'll need to edit the source file if you want to change the text. I've also attached a version without any embossed text in case you'd rather use a flat paper label.
Printing Guide:
No supports needed
Recommend only 2-3 wall lines so it's flexible enough to bend to get on the rod
Minimal infill. I used 15%.