6mm Push Rivet – Short Shaft Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Push rivet for 6mm holes. Strong and easy to print.
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 303
- Wydruki
- 0
- Wyświetlenia
- 992
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a remix of the original design by Avionix. Many thanks for sharing the model and making this remix possible.
This remix introduces two small adjustments compared to the original model:
The shaft length has been reduced by 1.4 mm to fit a different project.
The rivet body and rivet pin were slightly modified to achieve a cleaner and more reliable print result.
The overall design and functionality remain unchanged.
Printing information
The STL file is correctly aligned.
Layer height: 0.2 mm
Perimeter: 2
Infill: 100 %
Support: no
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.