Foxbat/Parallax Slamfire Trigger Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Locks the trigger in the pulled position, letting you slamfire without touching the trigger.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pretty simple, pull the trigger back, then slide the lock down to keep the trigger in place. Push it up again to unlock.
Works best with this auto-return slide: https://www.printables.com/model/1505996-foxbatparallax-slide-return
You will need one extra 4-40 screw, and one extra ball detent (same as the ones in the foxbat kit).
Assembly is simple, take the front and back parts and screw the 4-40 screws partially in so the two pieces are attached:
Next, drop a ball detent into the switch:
Put the slide in place with the detent on the side close to the barrel, then hold it in place and flip the whole thing over to put the plate into place on the back, and screw it down with another 4-40 screw:
Finally, drop the pin into the hole in the front block, and screw on the muzzle:
