Hyundai Ioniq 5 Dual Phone Add-On for Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage / holder for two phones that clips into the cup holders of an Hyundai Ioniq 5 (MY2021-2024)
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A phone holder add-on for the Hyundai Ioniq 5 (MY2021-2024) that sits behind the cup holder and should fit almost any regular smartphone.
The phones sit angled so that they don't move around too much when accelerating / braking.
Recommended to print in PETG or any other tough material (not PLA) to not melt when the car gets hot from the sun.
Can be printed in one go with support (i.e. with PLA as interface layer) or split into two parts with no support (requires the bottom part to be glued on after printing).
I initially printed with Bambu PETG-HF on Bambu Textured PEI plate, but wife didn't like the surface, so I used the Carbon-textured Effect plate in my “final” print.
The design is a remix of a model from @Vegar which I also printed, but I wasn't happy with the phones moving back and forth when accelerating / braking.
This is my first upload and actually my first attempt in CAD-modeling.