Apple MagSafe Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging dock for use with Apple MagSafe chargers. Compatible with all MagSafe devices No supports required
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Compatible with all Apple MagSafe devices. I have tested with
iPhone 14 Pro Max
iPhone 17 Pro Max
AirPods Pro
Apple Watch 42mm
Apple Watch 46mm
This charging dock is designed for the Apple MagSafe chargers (55.5mm phone charger, 27.6mm watch charger), which should snap in to a snug friction fit (0.1mm clearance).
If the fit is too tight, you can soften the PLA with a heat gun (or lighter) for just a few seconds, then the charger should easily press in.
If the fit is too loose, you can shim around the charger with a small strip of paper, masking tape or the filament purge line.
Other features:
Integrated heat vent to support the maximum fast charge rate
Hidden internal cable ducts
Internal space to add weight for stability. Fill it with anything heavy. Gravel, sand(mixed with glue), nuts and bolts, fishing lead weight, concrete...etc.
Recommended Print settings:
-Material: PLA
-LayerHeight: 0.1mm or variable
-Supports: None
-Speed: medium/slow (some printers might need this for better overhang)