Replacement Flags for Classic Electronic Fantasy Board Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement flag models designed to match the original flags used in a classic electronic fantasy board game.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This upload contains fan-made functional replacement flags for the original Dark Tower board game.
They are intended for repair and restoration of broken or missing flags commonly found on original sets.
No artwork, logos, or symbols are included.
Two STL variants are provided to correctly match the different flag mount locations used on the game board and on top of the tower.
## Included Files:
1: dark_tower_gb_flag.stl — Board Flag Variant (Regional Flags)
- Designed for the standard regional flag holes on the game board
- Reinforced insertion peg below the retaining collar for improved durability
- Fits snugly in original board holes
- Pole is intentionally slightly taller than the original for improved visual balance
- Flag width and waving area align with original artwork/sticker dimensions (within 0.8 mm nozzle tolerance)
2: dark_tower_twr_flag.stl — Tower Flag Variant
- Designed specifically to fit the flag hole at the top of the tower
- Slimmer insertion peg below the retaining collar to match the tower hole
- Shared visible geometry with the board variant
- Pole height matches the original tower flag height (within printing tolerances)
- Validated for proper fit without forcing or wobble
Note: The board flag variant (dark_tower_gb_flag.stl) will not fit the tower hole correctly.
Please choose the appropriate file based on the flag location you are replacing.
Note:
Allow the print to fully cool before removing it from the build plate. Use pliers or a similar tool to gently separate the tree support structure from the bottom of the flag post. Removing supports while the part is still warm can apply torsional stress and may break the insertion peg.
## Disclaimer
These files are provided as-is. Fit and tolerances may vary depending on printer calibration, material, and print settings.
The author is not responsible for damage caused by improper printing, scaling, or forceful installation. Do not force parts into place. Test fit carefully before full insertion.
If this repair helped you and you feel like it: