1 / 1
Beskar Spear from the Mandalorian for a 17mm diameter pole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spear I made for my kids. It was designed for a pole with a 17mm diameter, but it can be upscaled.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 228
- Wydruki
- 2
- Wyświetlenia
- 1513
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (1)Kolekcje (98)Powiązane
All prints are oriented for best placement. I used PETG but any filament should work. I used a .3 layer height but again you can print in finer detail if desired.
Happy printing!