Remington 7 typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for a Remington 7 typewriter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a Remington 7 typewriter. It should work for other Remington typewriters of the same family: Remington 6, 7, 8, and 9. This instance was created for a machine with a decimal tabulator, which needs more clearance underneath the machine. You can easily make the feet shorter if needed.
UPDATE: I added a parametric version which also allows creating a tapered top. On one of my Remington 6, for example, tapering the top was a better solution.
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
This design is based on original Remington 7 feet. These are cylindrical, with a hole in the middle for a ~3.1 mm diameter metal rod which gives the foot a little more rigidity. If you don't have such rods, you could make them, or omit them.
I made two versions of the feet, differing only in the diameter of the top part: 12.25 mm for the back feet, and 12.75 for the front feet. This might vary from machine to machine because of imprecise tolerances, aging of the machine, etc. Adjust accordingly. I also made a tapered version.
I printed this with 100% infill in the top part, and 60% infill in the bottom part: a little squishiness is good for the bottom, while a more solid part is good for the top.