Creality Hi Waste Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In the market for a voluminous zero miss filament waste bin? Look no further!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The waste bins I was looking at for my Creality Hi were just not quite big/tall enough for my liking. To add, most bins I was seeing, had very thin walls and I was not a fan. This prints clean and neat with 3mm walls. I'm learning SolidWorks and took the challenge on as a project. So, I modeled this. With a tall backboard, you won't find filament on or around your printer. ONLY in the bin! Mostly because when printing taller multi-color prints, I don't want filament to be tossed to the floor for our pets to potentially ingest.
UPLOADED THE MODEL W/O THE LOGO JUST FOR YOU GUYS! 😊
I printed with 3 walls and 25% infill.
I've been told "it's a waste of filament." ... Okay, then don't print it. 🤷♂
The model comes with adjustable feet in case you need to glue them to the bin. My printer is on a vibration isolator so I needed 15mm of legs. 😊
Let me know what you think and thanks for looking!