2-Liter Bottle Connector for Tornado
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects two 2-liter bottles to allow you to make a Tornado
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Connects two 2-liter bottles to allow you to make a Tornado. Thread fittings are the US standard 2-liter bottle threads, PCO28 1881. Should fit other bottles with a nominally 28mm OD and a 2.7mm pitch.
Originally designed to use a -020 O-ring (1" OD) for a seal on the bottle mouth but apparently doesn't really need it, at least with the coke bottles I tested it with.
Oil-Resistant Buna-N O-Ring, 1/16 Fractional Width, Dash Number 020 | McMaster-Carr
Needs to be printed with supports. PLA worked better than PETG for me because it is easier to remove the support material from the O-ring groove.
Flip the bottles over and give the bottles a swirl to create your own "tornado".
Tiny sharks for a shark-nado