Universal Pistol Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pistol mount that can be used for a variety of pistol sizes.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 810
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a universal pistol mount that uses strong rare earth magnets to secure the firearm while covering the trigger. It is designed to mounted with 3M double stick tape or 4 x #6 screws. It was designed to printed with TPU 95a to protect from scratching the finish of the pistol. There are two versions included. One for compact mounting and another that mounts at an angle to provide additional hand clearance. This uses 1" x 2" x 0.4" rare earth magnets available on Amazon. The design also has rubber plugs to be glued in after inserting the magnets, you'll need to print 2. If you have a brass nozzle you can pause the print, insert the magnets and print the plugs in place.
You may need to print with inner/outer brims to keep sections from lifting from the plate. I printed with 4 walls and 50% infill with a 0.6mm nozzle and 0.62mm line width and 0.23mm height. I also used normal (auto) supports.
Use at your own risk and responsibility!