1 / 3
1978-1987 (?) GM G-Body Stereo Lower Mount Patches — zdjęcie 1
1 / 3

1978-1987 (?) GM G-Body Stereo Lower Mount Patches

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model helps you to patch broken lower stereo mounts on 1978-1987-ish GM G-body cars

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

If you do not own an old 1978-1987 (or thereabouts) GM G-body car, this model isn't for you.

The lower stereo mount tabs on these cars are very fragile, and especially if you have been in and out of that area many times, or replaced the factory radio with an aftermarket, you may have blown out the screw mounts as I did.  I modeled these patches to be glued behind the original blown out screw tabs.

I'm not a fantastic 3D modeler.  Feel free to clean these up in a remix if you feel so inclined.  I figured they were good enough for patches that aren't typically visible unless you have the stereo trim off.

I recommend ABS if you can print it.  Please just don't use PLA, it won't survive the elements and conditions in a vehicle.

Tagi