Bike Tail Light Removable Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement mounting system for worn out, rubber mounting clip on my bike light, using a simple compliant mechanism.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The rubber finally wore off my Generic Bike Taillight from Amazon, so, I designed something to keep it going, rather than replace it. The assembly firmly attaches to the bag, while allowing easy removal for charging. The retention mechanism locks the light into place with a nice easy snap, while the mount itself (Removably) permanently snaps on to the back of the bag.
Print the Clip on its edge, so the layers reinforce the bend that it must make to flex closed on the bag. Layer height doesn't really matter for the clip, for the retainer, I used .2mm layer height with a 0.4 nozzle, laid flat on it's major face.