Magnetic Styrbar holder for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for an IKEA Styrbar remote that magnetically attaches to it and can be mounted onto an IKEA Skadis pegboard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A magnetig IKEA STYRBAR holder that does not rely on the original holder, but holds the remote with embedded magnets.
Mounts directly to the IKEA SKADIS pegboard without any additional parts.
Compared to the original, I modified the following:
Altered dimensions to fully back the STYRBAR remote to prevent it from tilting when pressing the on/brighter button
Changed magnet dimensions to 20 x 4 x 2 mm magnets
Modified “hooks” that hook into SKADIS holes to prevent them from breaking too easily and to improve fitment.
To assemble, make sure to put the magnets in the right way, because otherwise the remote will not properly align with the holder! See which way the magnets will attach to the remote by themselves and insert them accordingly.
Best print with supports under the hooks to unsure that the dimensions will fit. Mind the orientation when printing the STL file (flat surface to print surface). Very carefully mount to the SKADIS pegboard to prevent the hooks from breaking.