Doorhandle plate based on Noxxa aluline
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noxxa aluline did not sell the right size of plate i needed for my old doors. Copied the design to make it match.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Had these plates already on some of my doors.
But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i prefer this smaller size.
I included the size image for the holes for the screws and the hole for the nylon ring.
I bought a standard nylon ring with diameter 20 that fits in nicely, the screws are the standerd door handle ones and are about 5.5mm in diameter.
The whole thing prints without any support material needed when you lay then flat on the bed with the backside
Currently working on one for the bathroom because this requires a different size and some other adjustments.
Update 26-01-26
Finished the bathroom one. it does require some old hardware because it uses parts from the original lock. everything can be printed without needing any support material. It can be pushed together but i would advise some glue.
Extra hardware needed is 2 nylon M10 rings. they are needed to have the lock knob turn freely.