1 / 3
Storagetray for CSM Cylinder and Ribber dial
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Tray with a lid to keep my Ribber dial, cylinder and setup bonnet together, when I switch them out.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
When I switch out my cylinder I want to keep it the ribber dial and the setup bonnet together.
The Lid screws on. Because it is a a 7,5mm plastic rod it is not designed for strong forces but it is stronge enough for my usage.
It is designed to work with ribber and cylinders for:
Printing
0,28 Draft settings
0,4 Nozzle
Variable Layer height to support the screws
3 walls