Radbody Piranha bumper mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front mount and bumper for the Radbody Piranha hardbody.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a front/bumper mount for the Radbody Piranha hardbody for the 1:28 cars. It was designed to go with my Atomic MRV car, but will fit other cars as well. I designed it for the bumper to sit behind the bodies bumper, not underneath it.
I've printed it with PLA+ 2.0, but other materials will likely work fine. I've used a 0.2 nozzle, 100% fill grade and tree supports (see 3mf files). Haven't tried a 0.4 nozzle, but I see no reason why it shouldn't work.
On my MRV, I placed a 1mm shim above the mount for spacing. It's about 1 gr lighter than the Reflex mount for this body.
I've also made the side mount clips, you can find them here:
https://www.printables.com/model/1483494-radbody-piranha-body-clip
I made a V2 version which might fit some cars better. See my other makes.