Ken 'Okarun' Takakura
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ken 'Okarun' Takakura from DanDaDan
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Okarun.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2mm
#000005 PLA Elegoo Matte Black Transmission Distance: 0.2
#5f6575 PLA Esun Grey Transmission Distance: 1.2
#0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
#00f52c PLA Sunlu Green Transmission Distance: 6
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 9 unique filaments
Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Grey
At layer #15 (0.72mm) swap to Marine Blue
At layer #19 (0.88mm) swap to Green
At layer #23 (1.04mm) swap to Yellow
At layer #27 (1.2mm) swap to Brown
At layer #34 (1.48mm) swap to Latte Brown
At layer #41 (1.76mm) swap to Desert Tan
At layer #44 (1.88mm) swap to Jade White for the rest.