1 / 4
1UpUSA Super Duty Bike Rack Tray Foot Pad — zdjęcie 1
1 / 4

1UpUSA Super Duty Bike Rack Tray Foot Pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1UpUSA's Super Duty tray has a design flaw making direct mounting to T-track potentially dangerous. This pad fixes it.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

1UpUSA makes a Super Duty bike tray that can mount either to their hitch frame or to T-track. It comes with milled aluminum blocks that can either act as plates positioned under rack cross bars, clamping the tray to a rack system, or these blocks can also be directly bolted to the underside of the tray itself becoming feet that bolt directly into T-track. The problem is with the latter configuration. The plates lack enough vertical offset to clear the top surface of T-track bars. 1UpUSA's solution was to use 3/4 carriage bolts and extremely low profile nylon locknuts. But even with low profile hardware, the nylon on these nuts doesn't engage. The result is a rack designed for off-road use and heavy e-bikes attached with only 1 or 2 threads of engagement, no locking mechanism and positioned under the rack where it can't be inspected. 1UpUSA wasn't responsive to my reporting this issue beyond sending me 1" carriage bolts that don't fit given the stock clearance of the milled plate. 

My solution was to create spacers for these brackets, allowing for the use of an appropriate full thickness nut and full engagement of the nylon. 

Print in TPU 95A .20 Strength so that they're solid. 

Fully Tightened 3/4" Bolt on a Low Profile Nut w/ Zero Nylon Engagement 

1" Bolt w/ Full Thickness Nut. Full Nylon Engagement  w/ Protrusion and Clearance

Tagi