Stan The Man - Stan Lee Lithophane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
149mm x 146mm x 3.3mm (6.4mm with frame). Software used: Photoshop, Blender, Meshmixer, S3D to add the frame.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
149mm x 146mm x 3.3mm (6.4mm with frame).
Software used: Photoshop, Blender, Meshmixer, S3D to add the frame.
Some settings and info on my site(vital if slicing in S3D): https://www.gadunky.com/litho-print-settings/
If you want the "Blaze" hot look you need to print in an off white material and then backlight it with a warm white led and cool white led for extra contrast(Colorfabb Standard WHite PLA recommended).
Original artwork by Neal Adams
Please note, it's easiest to slice this in Cura or Slic3r PE. There are a couple of extra steps in S3D because of the way I designed this STL and frame. A bonus of this is there are some extra editing options available to you if you know what you are doing in S3D(connected meshes, cropping etc).
.
Print instructions
0.1mm - 0.12mm layer height.
6-7 walls/shells.
100% infill.