Parametric magnetic Keyholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw a similar Model on Etsy for a ton of money (more than 20€ + shipping) and decided to take 30 mins and model my own
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Saw a similar one on Etsy and was asked by a friend to model something like that. Instead for spending 20€+ you can now use my simple OpenSCAD File to model Keyholders to your liking. Make 1 or 5 holes for magnets, adjust the diameter and thickness of your magnets, adjust tolerances to your printers needs and so on.
Download OpenSCAD for free
Open File in OpenSCAD
Adjust parameters to your needs
Hit F5
Hit F6
Hit F7
Export as STL
Slice in your designated Slicer
Print
Profit
The pre-exported STL was created for 6x3mm Neodym Magnets with +0.2mm tolerances (should suit most printers) creating 3 magnetic spaces for your Keyrings to hold. You can use double sided Tape to stick it to a wall.
Don't be afraid if you don't see any precut holes before slicing the model. They do appear right after you slice the model.
If you can't get to make OpenSCAD work for you, write me a comment and I will preexport models to your needs.
Please post a make if you printed one.
Share your models, don't sell or buy on Etsy