100mm x 200mm x 240mm Semi Parametric Modular under Shelve Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large Easy print modular and highly configurable under shelve storage with multiple drawer option.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
I became frustrated with multiple drawers holding my screw collections and electronics storage taking up too much space and I could never remember what I had in them. I wanted bigger and flatter storage options and organising them under my storage racks.
200mm wide
100mm high
240mm deep
I started off with the dimensions above and made 1,2,3 and 4 drawer units using a parametric design approach in fusion 360. The hobby use license does not support feature options and parametric drawer designs could not be implemented, hence the title semi parametric. You need to edit the drawer partitions in the timeline to get variations.
I wanted the flexibility to adjust the space dynamically as the part stock change over time.
This is a much more pleasant experience now and my entire small screw stock is now in one place.
Printing
Everything prints flat and only the drawer handles needs support. I used tree support and printed using PETG.
Assembly
The drawer frame parts are tight fitting and needs a little persuasion to click in. I tap them lightly with a small mallet to click in securely.