Heavy Duty CYCLONE SEPARATOR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A big cyclone separator for a workshop. Uses 50mm plastic pipes for connections.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Basically, I wanted to 3d print a cyclone, but didn't really like the options, which already existed. So, I made my own!
PRINT REQUIREMENTS
No supports needed
220x220mm buildplate*
PETG/PLA (beware of warping)
ADDITIONAL HARDWARE
M3 and M4 screws and nuts
Triac Dimmer(optional)
50mm polypropelene pipes
50mm flexible hose
PRINT LIST
1x Cyclone
1x Electric Enclosure(optional)
2x Filter Pipe(optional)
1-2x Pipe Fixture
I've also included files for a standalone motor, but IDK if they will fit your motor. (I've used a motor from a 20-year old DAEWOO vacuum cleaner, in case it helps). Cyclone is split into three parts, which are glued together. My filter design uses shoptowels, cloth, etc. Anything air can go through, really.