1 / 4
MMU3 R4 Casette With 608 Bearing simplified — zdjęcie 1
1 / 4

MMU3 R4 Casette With 608 Bearing simplified

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MMU3 R4 Casette With 608 Bearing simplified

Ocena
5 / 5
Polubienia
7
Pobrania
40
Wydruki
1
Wyświetlenia
155
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This is a remix of the original model, which I really like and consider well designed.
I only made a few practical adjustments to better suit my own use case.

🔄 Changes compared to the original model

  • Center pin reduced to 7.9 mm
    → This makes installing the bearing much easier and avoids overly tight fits.

  • Removed the plateau visible in the original images
    → I personally didn’t find it necessary for my setup and preferred a simpler geometry.

  • Wheel redesigned as a single solid part
    → One side has a small bulge, the other side is flat.
    When assembling, the bulged side goes downward, creating the required spacing, while the flat side allows the part to slide on easily.

Overall, the changes are minor but improve usability and assembly for my specific application.

🖨 Print settings used

  • Material: Elegoo PLA+ (Black)

  • Nozzle: 0.6 mm

  • Layer height: 0.3 mm

  • Print time: 3 hours 12 minutes

  • Supports: none

The model printed perfectly without supports, no issues at all, and works exactly as intended.

Tagi