Spanish-suited cards case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case I designed to hold Spanish-suited cards no larger than 97.6 x 64.8 mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
This is a case I designed to hold Spanish-suited cards. The original box should be no larger than 97.6 x 64.8 mm for it to work. The model showcased has my little cousin's name on the lid, as it was a gift for her.
It was printed on an Ender 3 V3 SE printer with white PLA with nozzle and bed temperatures of 190 °C and 60 °C, respectively
Note that the print shown came out warped; however, this should not occur on your printer.
To assemble, use tweezers to lock the base and the lid together, as shown in the pictures. Afterwards, screw in the screw into the threaded hole in the base. Finally, insert the handle's spheres into the holes present in the lid; the handle itself should bend slightly.