Side Table using empty filament spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These table tops are great for using those empty filament spools that pile up in your room after some months of printing
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
These table tops are great for using those empty filament spools that pile up in your room after some months of printing.
Designed for regular size, 1kg spools, with a 200mm diameter size.
All you need is four columns of empty spools. In my case, I used four columns of 9 spools each so it could be as tall as my living room's sofa.
Glue the empty spools on each column, then tie up the four columns
Each part of the table top can be printed separately and glued together. Use the pins to align all parts.
Material: PLA / PETG
Nozzle: 0.4mm
Nozzle height: 0.2mm
Supports: No
AMS required: No
Infill: 5%
Walls: 3