Bike Pannier Clip (Sew On)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sew-on pannier clip that turns any bag into a bike bag.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Clips onto 8mm aluminum bike rack. Sew on with very strong thread. I used a heavy-duty nylon thread. Should have pretty good retention and easy removal. Remove by squeezing the thumb lever while pulling up. You don't need to squeeze it that much.
Print with a relatively flexible filament like PETG. Use enough perimeters that the lever is completely filled with perimeter traces. Print on the side (as modeled) so the lever is oriented for maximum strength. For instance with a 0.4 mm nozzle I use 7 walls.
Needs some supports for the lever.