Blickensderfer 5 typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for a Blickensderfer typewriter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a Blickensderfer 5 typewriter. It might work with other Blickensderfer models, but this was only tested with a 1909 aluminum Blickensderfer 5.
I initially created cylindrical feet, and then added some "bulged" feet to look a little more like the presumed originals. Finally, because the left rear foot is near a screw, I created one version with a notch to clear that screw.
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
The feet just push into the holes in the machine's metal base. In my instance, there is a wood screw in the left rear hole, and the new foot simply screws into that as well.