BaMaKey EHT-ii /EHT-2 Straight Key Holder - BaMaTech
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the famous BaMaTech mini straight key
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the popular holder by VK1HF this holder houses the EHT-ii straight key from BaMaTech. This holder features a little cable organizer since the cable of the EHT-ii is non-detachable. Designing it was a tradeoff between height, cable tightness/stiffness and fitting the jack connector above. I am open to feedback about increasing the height or diameter of the cable organizer. Just leave a comment.
Note: Like for the holder of the TP-iii linked above you NEED TO FILE DOWN THE TAB in order to find the sweet spot for easily opening the holder again. Press the sides of the cover a little bit in order to lift the notch in the cover enough to let go of the tab.
IMPORTANT: Due to the more quadratic footprint of the cover more filing is needed than in the holder by VK1HF. It does work quite well in the end though. If the cover ever gets stuck during tweaking use a screwdriver to gently lift the notch.