1 / 1
Extreme Z-Seam Stress Test – Holes, Corners & Start/Stop Hell — zdjęcie 1

Extreme Z-Seam Stress Test – Holes, Corners & Start/Stop Hell

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extreme Z-Seam Stress Test – Holes, Corners & Start/Stop Hell

Ocena
0 / 5
Polubienia
2
Pobrania
35
Wydruki
0
Wyświetlenia
100
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

This model is designed as a real-world Z-seam stress test, not a “pretty” calibration print.

It intentionally contains:

  • Many small holes (short perimeters)

  • Sharp inner and outer corners

  • Thin walls and frequent direction changes

  • Constant start/stop extrusion events

This forces the slicer and printer to place Z-seams:

  • on holes

  • in corners

  • on internal and external walls

  • with no easy place to hide them

Purpose

The goal is to test:

  • Pressure Advance / Linear Advance tuning

  • Retraction & restart behavior

  • Extra length on restart / wipe settings

  • Z-seam consistency on complex geometry

If this model prints cleanly (no gaps, no missing filament, no blobs),
your PA, retraction and restart settings are well balanced.

Notes

  • This is not a cosmetic test

  • Minor seam marks are expected

  • Large gaps, missing segments or blobs indicate tuning issues

Tagi