1 / 8
Sunglasses, Sonnenbrille, DIY (Oakley Holbrook lenses) — zdjęcie 1
1 / 8

Sunglasses, Sonnenbrille, DIY (Oakley Holbrook lenses)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DIY sunglasses to match Oakley Holbrook lenses.

Ocena
0 / 5
Polubienia
14
Pobrania
173
Wydruki
1
Wyświetlenia
918
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Description

I designed these sunglasses a few years ago after my sunglasses (Okley Holbrook) broke while mountain biking. The goal was to reuse the lenses and have an affordable frame that could be easily and cheaply replaced if damaged.

Because I was so impressed by the customization options, I created additional temples that can be customized with a logo. I've included my "Bazinga" logo here as an example. You can use this as a base for your own logo on the sunglasses, or you can use the temples without a logo.

I deliberately omitted additional hinges and other components in the design because I wanted the glasses to be assembled without any tools. This allows you to easily replace parts without tools, even when you're on the go. Simply insert the temples into the frame; they will click into place and, with the correct printer settings, should have enough tension to prevent them from opening on their own (in the closed position).

The frame is designed to accommodate Oakley Holbrook lenses. However, I've also tried various aftermarket lenses, and these worked perfectly for me (you can find them on eBay or AliExpress – please try them yourself).

Material Recommendations, Settings, and Support (Post-processing):

The images show a suggested positioning during the printing process. For maximum strength, the brackets and frame should be printed in a position similar to that shown:

When choosing a material, I would recommend PETG (at least), as the sunglasses might be left in the car during the summer. Tests with ASA and ASA-X (CR3D) showed that while ASA would be a good material due to its good UV resistance, my prints were quite brittle and lacked sufficient strength. Despite calibrating the filament, I could only mount the lenses when the model was scaled by approximately 1% (X, Y, Z). Materials with higher strength are, of course, an upgrade and will make the sunglasses more durable. Due to the necessary support structure, I would suggest some minor surface sanding to improve comfort. Depending on the material, you can also chemically smooth it (e.g., when using ABS).

Another way to simplify the finishing process is to print the support interface layers in PLA (if PETG is used as the main material), as shown in the image (orange = PETG, black = PLA). PLA does not bond with PETG and can therefore be easily removed (see instructions: https://www.youtube.com/watch?v=Matf1Mna2zI).

For printing, I would recommend a layer height of at least 0.2mm or less. Use at least 2 layers for wall loops, and I always print top and bottom shells with 5 layers. Use gyroid infill (better strength than grid) or print with 100% infill.

Assembly of the parts

Once the frame is complete, all support material should be removed. Especially in the areas where the lenses will sit, no support residue should remain. Sharp edges should be smoothed slightly at this stage to optimize wearing comfort.

When selecting lenses, please note that the original lenses (Y.) are slightly thicker, as shown in the photo. The glasses were originally designed for these lenses. However, you can also use thinner lenses (X.). There might be a little more play between the lens and the frame, but this shouldn't be a problem.

I've found the following procedure to be effective for mounting the lenses (see image):

A.: Insert the lens into the lower slot of the frame and apply gentle pressure with your thumb.

B.: Continue applying downward pressure with your thumb and use your other hand to push the lens into the slot at corner 2.

C.: The lens should now be held in place by itself, but it's not yet in its final position. Continue applying gentle downward pressure and use your other hand to push the lens into the slot at corner 3. Alternatively, you can also push the lens into the slot from corner 2, bit by bit (see (3.)), until you reach corner 3.

To remove the lenses, simply reverse the steps. You may need to realign the lens with the frame during these steps if it's slightly misaligned.

The temples of the sunglasses must also be freed from the support and, if necessary, any sharp edges (from the support) smoothed slightly. It is important that the gap at the tip of the temples is clear so that this area can spring inwards when the temples are attached.

If this is the case, twist the temple slightly and insert only the lower part into the frame (see image, red arrow), leaving the upper part free (see green arrow). Now rotate the temple so that the upper part rotates within the frame (see blue arrow). To remove, use the reverse sequence. Important: Always rotate the temples when attaching them, do not simply pull. The temples are very difficult to attach or remove by pulling or pushing, which is intentional to ensure a secure fit during use.

Happy making!

Beschreibung 

Ich habe die Sonnenbrille vor einigen Jahren entworfen nachdem meine Sonnenbrille (Okley Holbrook) beim Mountainbiken kaputt gegangen ist. Ziel war es die Gläser weiter zu nutzen und einen günstigen Rahmen zu haben, der bei einem defekt einfach und kostengünstig ersetzt werden kann.

Da ich von den Möglichkeiten der Individualisierung begeistert war, habe ich zusätzliche Brillenbügel erstellt, in die eine Logo eingeklebt werden kann. Als Beispiel habe ich hier mein “Bazinga-Logo" eingefügt. Ihr könnt Euch auf der Basis Euer eigenes Logo für die Sonnenbrille gestalten oder Ihr nutzt die Bügel ohne Logo.

Ich habe bei der Konstruktion bewusst auf zusätzlich Scharniere etc. verzichtet, weil ich die Brille ohne weitere Hilfsmittel montieren wollte. So habt ihr die Möglichkeit, auch wenn Ihr unterwegs seid, die Teile werkzeuglos auszutauschen. Dazu müsst ihr die Brillenbügel nur in den Rahmen stecken, diese rasten dann entsprechend ein und sollten (bei passenden Drucker-Einstellungen) genügend Vorspannung haben, das sich die Bügel nicht von selbst öffnen (in geschlossener Position).

Der Rahmen ist so konstruiert, das man die Oakley Holbrook Gläser nutzen kann. Ich habe aber auch verschiedene Nachbau - Gläser ausprobiert, diese haben bei mir ohne Probleme funktioniert (findet ihr auf Ebay oder AliExpress - bitte selbst ausprobieren).

Werkstoff Empfehlung, Einstellungen und Support (Nacharbeit):

Auf den Bildern seht Ihr einen Vorschlag zur Positionierung beim Druck-Vorgang. Die Bügel und der Rahmen sollten für maximale Festigkeit in einer ähnlichen Position wie gezeigt gedruckt werden:

Bei der Werkstoffauswahl würde ich (mindestens) PETG empfehlen, da die Brille bei sommerlichen Temperaturen auch mal im Auto liegen kann.Versuche mit ASA und ASA-X (CR3D) haben gezeigt das ASA zwar wegen der guten UV Beständigkeit eine guter Werkstoff wäre, jedoch waren die Drucke bei mir recht spröde und wiesen keine ausreichende Festigkeit auf.  Trotz Kalibrierung des Filaments, konnte ich die Brillengläser nur montieren wenn das Modell ca. 1% (X;Y,Z) skaliert wurde. Werkstoffe mit höherer Festigkeit sind natürlich nochmal ein Upgrade und machen die Sonnenbrille stabiler.

Durch den nötigen Support, würde ich an einigen Stellen eine Nacharbeit (leichtes Schleifen der Oberfläche) vorschlagen um den Tragekomfort zu erhöhen.  Je nach Material könnt Ihr den Werkstoff natürlich auch chemisch glätten (z.B. bei Verwendung von ABS). Eine weitere Möglichkeit Euch die Nacharbeit zu erleichtern, ist ein Druck der Support-Interface-Layer aus PLA (wenn als Haupt-Werkstoff PETG verwendet wird), siehe Bild (Orange = PETG, Schwarz = PLA). PLA geht mit PETG keine Verbindung ein und kann daher sehr leicht entfernt werden (siehe Anleitung: https://www.youtube.com/watch?v=Matf1Mna2zI ).

Für den Druck würde ich eine Schichtstärke von mindestens 0,2mm oder kleiner empfehlen. Wall loops mindestens 2, top und bottom shells habe ich immer mit 5 gedruckt, Infill Stil Gyroid (bessere Festigkeit als Grid) oder gleich mit 100% Füllung drucken. 

Montage der Teile 

Nachdem der Rahmen fertig ist, sollte das Support-Material restlos entfernt werden. Vor allem in den Bereichen wo die Gläser sitzen sollten keine Support Rückstände mehr vorhanden sein. Scharfe Kanten sollten in diesem Schritt für die Optimierung des Tragekomforts etwas verschliffen werden.

Bei der Auswahl der Gläser sollte beachtet werden, das die Originalen Brillengläser (Y.) etwas dicker sind, siehe Foto. Die Brille wurde ursprünglich für die originalen Gläser konstruiert. Ihr könnt aber auch dünnere Gläser (X.) verwenden, eventuell ist dann etwas mehr spiel zwischen Glas und Rahmen, was aber kein Problem darstellen sollte: 

Für die Montage der Gläser hat sich bei mir folgendes Vorgehen als gut erwiesen (siehe Bild): 

A. : Brillenglas im unteren Schlitz des Rahmens einsetzen und mit dem Daumen leichten Druck ausüben

B. : Mit dem Daumen weiterhin Druck nach unten ausüben und mit der anderen Hand das Brillenglas in den Schlitz der Ecke 2.  drücken.

C. : Das Brillenglas sollte nun schon von selbst im Schlitz halten, sitzt allerdings noch nicht an der finalen Position. Dazu weiterhin leichten Druck nach unten ausüben und mit der anderen Hand das Brillenglas in den Schlitz der Ecke 3.  drücken. Alternativ kann man das  Brillenglas auch von der Ecke 2. aus Stück für Stück (siehe (3.) ) in den Schlitz drücken bis man in Ecke 3. angekommen ist.

 Für die Demontage die Reihenfolge rückwärts anwenden. Teils muss man bei den genannten Schritten das Brillenglas zum Rahmen ausrichten, falls sich dieses leicht verdreht.

Die Bügel der Sonnenbrille müssen ebenfalls vom Support befreit werden und wenn nötig an scharfen kanten (vom Support) etwas geglättet werden. Wichtig ist, das der Spalt an der Spitze der Bügel frei ist, so das dieser Bereich beim montieren der Bügel nach innen federn kann. 

Wenn dies der Fall ist, den Brillenbügel etwas verdrehen und nur mit der unteren Seite in der Rahmen einlegen (siehe Bild, roter Pfeil), die obere Seite liegt hier noch im freien (siehe grüner Pfeil). Nun den Bügel so drehen das die Oberseite in der Rahmen rotiert (siehe blauer Pfeil). Zur Demontage die umgekehrte Reihenfolge anwenden, wichtig: Die Bügel beim montieren immer rotieren, nicht einfach nur ziehen. Die Bügel lassen sich durch ziehen / drücken nur sehr sehr schwer montieren / entfernen, was auch gewollt ist, damit diese bei Benutzung auch sicher sitzen. 

Happy Making….

Tagi