Fuji GS645S Front Cover

A replacement front cover for the Fuji GS645S Professional medium format camera. Mine had perished and was no longer securely attached, so I 3D scanned it to create this replacement.

There is a hole in the model for the small grey button which is used for bulb exposure; I couldn't find a way to reliably reproduce the original actuation mechanism for this, and so have filled in the hole in my physical copy. If you figure out a way to get this to work, please do remix!

Also included is an SVG for the focus markings. To use this, print on a regular paper printer then glue to the top of the 3D print in the appropriate spot. I didn't bother with SVGs for the other markings but that should be easy enough to do also.

Printing and Installation

Print with the front flat face (which has the text "GS645 Professional" on the original) on the bed, supports enabled, with at least 3 walls. Remove supports and sand / paint to your preference; I used gloss black enamel paint followed by a satin clear coat to closely mirror the camera's original finish. Fill in the hole used for the bulb release with putty.

To install on the camera, remove the three tabs used to adjust focus, shutter speed, and aperture, then remove the two screws holding on the front cover. The cover should lift off. With the cover off, remove the two flat-head screws fastening the 'bumper-bar', and the bar. Reassemble on the new cover in the reverse order.