Prusa I3 MK3S LED light bar mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice LED light bar mount for a Prusa I3 MK3S printer, should fit on previous printer versions (MK2, MK2.5, MK3).
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 342
- Wydruki
- 5
- Wyświetlenia
- 2474
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A nice LED light bar mount for a Prusa I3 MK3S printer, should fit on previous printer versions (MK2, MK2.5, MK3).
It's based on previous work from "Gigante" user (https://www.thingiverse.com/thing:3316724), but his arm lenght was too short and the stepper of the head unit of my printer was knocking the LED light bar so I made this with a higher and longer arm for the LED light bar.
Also found other mounts:
https://www.thingiverse.com/thing:2205617
https://www.thingiverse.com/thing:2863523
https://www.thingiverse.com/thing:2949974
https://www.thingiverse.com/thing:1506126
UPDATE 04/19/2019: New design (v2) on the hook that attaches to the prusa vertical frame to avoid possible touches with the extruder when reaching the higher top.
UPDATE 04/26/2019: Updated design, the hook that attaches to the prusa frame was revised, now it has a slimmer profile on the front side, this to prevent even further the extruder to reach it.
UPDATE 07/262019: Another design, now with hooks to easy remove the led bar
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 20% gyroid
Filament: cheap generic ABS black
Notes:
Print two pieces
Use at least 4 wall paerimeters, 15% to 20% infill
Use zip ties (x2) to mount the LED light bar
How I Designed This
Used Autodesk Fusion 360