WLTOYS 1240XX and 1440XX series Front Hub/Knuckle Reinforced (GigaChad V1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reinforced replacement version of the WLTOYS 1240XX and 1440XX series Front Hub/Knuckle by @CloudWalker4S_968852
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Based on the Replacement front knuckle for WLTOYS RC 144001 RC car knuckles designed by @CloudWalker4S_968852.
Compatible with the WLTOYS 144001, 144010, 124007 (tested on this), 124016, 124017, 124018, 124019 RC cars.
This iteration has additional material added with extruded profiles for additional strength and stiffness.
Developed after the stock knuckles crumpled on impact, this is much stronger despite being 3d printed.
For max strength, print standing up with the largest layer height possible, and supports for the steering linkage and upper knuckle joint and Hub.
Need something beefier? Refer to the next version, the GigaChad V2!