Microplate magnet shelf (ANSI SLAS standard 96, 384, etc..)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Microplate magnet shelf (ANSI SLAS standard 96, 384, etc..) that can be placed in sterile laminar flow hood
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Microplate magnet shelf (ANSI SLAS standard 96, 384, etc.. wells or PCR plates) that can be placed in sterile laminar flow hood.
Model contains thin cutouts inside the wall with magnets, it is made to force slicer make extra walls to increase strength.
Print with ABS or ASA, to be UV resistant. Use 3 - 4 wall lines. Make sure to have good bed adhesion to prevent warping, use glue stick or spray on PEI bed and brim in slicer.
Models requires 4 Neodym magnets 20 x 10 mm either 2, 2.5 or 4 mm thick, use thicker magnets for stronger hold. I used one from Aliexpress, to get them cheaper but they generally have weaker hold. Ideally one should source them from reliable seller, that specify type of Neodym and its strength.
Use strong glue that work for ABS/ASA to metal combination. Regular superglue isn't working well. I saw online recommendation to use Loctite 480 glue. I have tried similar one from Aliexpress, called FixWant 480 and it seems to be fine.