Concave bottom bottle/shaker body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The bottle/shaker body is 185mm long and has a very common 41mm radius. Matching caps can be found on my profile.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- BSD License
This bottle/shaker body is 185mm (7.2 inches) long and has a very common 41mm (1.6 inches) radius. The shaker's original goal was to be used a deadlift jack. With an infill of 30% i was able to use it on a 340kg (749lb) bar before breaking. The bottle + cap make it longer than certfied IPF 25kg metal plates.
Check my profile for different caps. The caps match with the bottles screwing dimensions.
Please do not use this as a drinking liquid recipient. Even with food safe graded filament, FDM printing is not a food safe printing method. A solution to make FDM 3d prints food safe is to use food safe coating.