1 / 8
Radxa Rock 3A with Noctua A4x10mm Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 part case for RADXA 3A
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This case for RADXA Rock 3A needs 4x M3x20x6mm standoffs and is made for M3x5mm melt-in thread inserts.
Mount the SBC on the case-base with the four M3 standoffs with M3 threads. To fix the top-case use 4x M3x6 or M3x8mm countersunk screws.
The top-case is prepared for a Noctua A4x10mm (40x40x10mm/5V) fan using the screws provided by Noctua.
Radxa Fan Pinout - GPIOs left:
PIN 1: 5V
PIN 2: PWM
PIN 3: GND
NOCTUA:
Yellow: +
Black: GND
Blue: PWM
Green: RPM