east3D Gecko Remix E3D fan with integrated layer-fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remix for the east3d gecko .(this is the M3 screw version. 30mm M3 screw and a nut needed) The body has…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my remix for the east3d gecko .(this is the M3 screw version. 30mm M3 screw and a nut needed)
The body has been modified. It now holds the m3 nuts in place for you.
the 30mm fan mount now only uses 2 m3 screws. ( i added threads to the model)
(You have to modify your fan)
by cutting off one of the mounting holes.
(just the outer corner part of the mounting hole closest to the extruder carriage try not to cut to much at a time. you dont want to break the fan housing. )
to allow clearance for the extruder frame and to allow you to properly seat the cooler to the cold-end.
I added a remixed nozzle (changed from the word !hot! to gecko) and opened up the thru-hole a bit to allow the m3 screw to fit easier. (needs to be positioned letter side down)
Category: 3D Printer Parts