East3D gecko coreXY x-y pulley brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I seen a couple versions of this type of pulley brace (like the idea) but i wanted mine to lock in place using the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I seen a couple versions of this type of pulley brace (like the idea) but i wanted mine to lock in place using the original equipment and is wider than all others for stability . this version holds the m4 nut for you and has a bearing spacer built into the top so the bolt can lockdown the brace to the shaft without obstructing bearing movement.. i also added a cutout for the z adjustment knob. i use mine upside down to have the adjustment knob under the x-y platform.
and of course i added a gecko logo to the braces for that added touch..
This is one of the best mods i've put on my machine..
Print Settings
Printer:
gecko coreXY
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
100%
Notes:
I printed my braces on there side with the geckos head is closest to the plate.
Category: 3D Printer Parts