Key Ring Darning Needle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is one component of the Knitters Friend Bundle!~ Simply print, add a jump ring, and you're ready to knit on the go!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Which size should I choose?! Well weary fiber artist, the small size is perfect for metal darning needles and can hold needles 2 1/2" long. The large sized case is great for plastic darning needles no longer than 3 1/4".
Materials
Filament
Small Needle Case & Top ~14 grams
Large Needle Case & Top ~19 grams
Keychain
3/8" Jump Ring (at least 1)
Split Key Ring (recommended size: 1/2")
Needle Nose Plyers
Print Settings
Setting | Value |
Layer Height | 0.1 mm |
Perimeter | 3 |
Infill | 15% |
Supports | See instructions |
Instructions
Plate each print as oriented in the STL, the Needle Case Top will require supports everywhere. Once the print is complete, push a pair of needle-nose plyers into the supports, and simply un-screw the supports. Push the supports out of the key ring loop and you're ready to put on a key ring!
Its recommended you use a 3/8" jump ring to attach a split key ring. Simply use needle nose plyers to open the jump ring, thread it into the Needle Case Top Loop. Before closing the jump ring, insert the slip key ring & close the jump ring with your plyers. That's all folks!