wanhao duplicator 4s z-axis-brace and bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This brace I created for the wanhao duplicator 4s will greatly improve your prints by eliminating z-axis swing.. first…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This brace I created for the wanhao duplicator 4s will greatly improve
your prints by eliminating z-axis swing..
first two pics of other things is showing the weird swirls and rounded waves before I installed the brace.
the last pic shows how straight the lines are after I installed the brace.
Instructions
I printed the brace in abs at 70% infill.
try to keep print speed low.
(I ran mine at 45) (could have done 35 or 40)
I used support for just the bushing housing.
I printed the bushing in pla at 100% infill.
no raft for either brace or bushing.
Category: 3D Printer Parts