Pacific Antenna Dummy Load Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Pacific Antenna Dummy Load (v2).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Case is designed with tight tolerances and a friction fit. I printed mine in PLA. You may need to enlarge it 1% if you are using a material that shrinks after printing. My board is the through hole model. It looks like this case should also fit the surface mount variant, but no guarantee. When printing, flip the lid 180-degrees for best orientation on the print bed. You may also want to add some (tree-type) support on the case for the circular BNC opening depending on how well your printer bridges. The lid snaps firmly in place, but for a more permanent solution, you may want to add a drop of CA glue inside the rim.