Miter Slot Nut/Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miter slot nut/block used with 1/4 hex head nut or bolt for jigs and featherboards
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Two styles (short and long) to hold ¼ hex nuts or bolts in a miter slot. Each style has 2 variants based on the two sizes (10.36mm and 11.1mm) of ¼ hex bolts I had on hand. The long style was modeled to line up with the slots on the True FLEX featherboard (https://www.prusaprinters.org/prints/17853-true-flex-featherboard-with-accessories-14-20-fast). These work well in my Delta 36-725 table saw and the large miter slot in this combo track from Amazon ( https://www.amazon.com/gp/product/B00153LKEG/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1 ) . These should work well on most standard ¾ by 3/8 miter slots.
Printing with PETG, 20% infill, 3 perimeters (min) was sufficient for me.